Table of Contents
This page contains a few code examples that can be used to explore and test imperix’s automated code generation workflow using PLECS.
These examples are meant to be loaded on a B-Box RCP converter controller, possibly using a Plexim RT-Box as a HIL simulator for the plant. Both devices can be conveniently connected via a suitable hardware interface.
Additional code examples are provided in the different application notes.
The following files have been adapted – with permission – from existing code examples developed and published by Plexim GmbH.
Automated code generation from PLECS is supported from ACG SDK 3.5 and above, which can be download here: https://imperix.com/downloads