This page presents a practical example of Aurora communication with Typhoon HIL simulators, specifically the HIL101, HIL404, HIL506, and HIL606. It provides a ready-to-use user…
Conventional model-based control in power electronics relies heavily on deriving precise mathematical models of the physical system. In contrast, data-driven control shifts this paradigm by…
This page outlines the configuration methods for analog I/O channels on imperix controllers. While digital I/Os are configured exclusively via software and remain consistent across…
This article describes how to use the XY plot module of imperix Cockpit to interact with the user code running on imperix controllers, namely the…
This page presents a practical example of Aurora communication with OPAL-RT simulators, specifically the OP4510 and OP4512. It provides a ready-to-use user application, along with…
While imperix controllers are typically programmed with applications built in Simulink or PLECS, imperix also provides direct access to FPGA resources through its FPGA development…
This page presents a practical example of Aurora communication with with Plexim simulators, namely the RT-Box 1, RT-Box 2 and RT-Box 3. It provides a…
Most imperix controllers feature 36 bidirectional 3.3V I/O lines, commonly known as USR pins. Driven directly from the FPGA, these custom-application I/Os are ideal for…
Debugging an FPGA design can be difficult without clear visibility into the high-speed logic fabric, where signals change at nanosecond scales. Xilinx Integrated Logic Analyzer…
This page describes how to upgrade the imperix IP in an existing sandbox project, whether to restore compatibility with a newer SDK version or to…
End of content
End of content
