This technical note shows how an SPI communication link can be established between an FPGA and an external Analog-to-Digital Converter (ADC). The development setup will…
This technical note shows how the implementation of an FPGA-based hysteresis controller can be conducted, starting from the modeling stage, following with automated VHDL code…
This technical note provides an example of how a fast hysteresis current controller can be implemented, leveraging the possibility of editing the FPGA firmware for…
This example implements the control for a three-phase PV inverter. Such a system can be typically found in small industrial photovoltaic facilities, which are directly…
This article covers the control of a single phase solar PV inverter using Fictive Axis Emulation (FAE) and its implementation on a programmable power converter.
This example generates three phase alternating currents from a voltage source inverter in an open loop manner. It can be used in a grid-forming application.
In a standard configuration, the control algorithm is executed just after each sampling event. The oversampling feature enables the possibility to set up multiple sampling…
This note presents a possible approach to apply pre-recorded profiles as setpoints for a control algorithm developed on Simulink with ACG SDK. It assumes the…
This product note explains how to compute the discrete control delay of a control algorithm running on an imperix controller. Context The execution of a…
This note covers the configuration and implementation of variable frequency operation with imperix controllers (B-Box RCP and B-BoardPRO). Changing the modulation frequency during the control…
End of content
End of content
