LOG – Write a log message
SD050This block writes a user-defined message in the log module of Cockpit. Numerical values can be inserted into the message using the conversion specifier “%f“,…
SD050-
-
Making an OPC UA client using MATLAB
PN178
The Industrial Communication Toolbox Add-On for MATLAB and Simulink (formerly OPC Toolbox) allows communicating with an OPC UA server directly from MATLAB. This page explains…
-
OPC UA: the communication protocol for industrial automation applications
Imperix relies on the increasingly popular OPC UA industrial protocol to interact with programmable controllers remotely. To do so, imperix controllers (or the TPI8032) embed…
-
PP-PWM – Programmed Patterns PWM
SD015
The FPGA-based PP-PWM (programmed pulse pattern) peripheral provides a specialized PWM scheme for two and three-level inverters, which relies on pre-computed pulse patterns. This type…
-
BRK – Brake
SD106
The brake (BRK) block provides access to the brake control unit of the Motor Interface for B-Box RCP. The Motor Interface for B-Box RCP features a brake…
-
TRQ – Torque sensor
The torque sensor (TRQ) block reads the voltage output of a torque sensor and converts it to torque. It targets drive applications. The B-Box RCP…
-
TMP – Temperature sensor
The temperature sensor (TMP) block provides access to the temperature measurement from a PT100 or PT1000 sensor for drive applications. The B-Box RCP supports up…
-
S/C – Sin/cos encoder
The sin/cos encoder (S/C) block retrieves the Sine and Cosine signals of a sin/cos encoder connected to the Motor Interface. The B-Box RCP supports up…
-
HAL – Hall sensor input
The hall sensor interface (HAL) block provides access to the commutation signals from Hall effect sensors of a brushless DC motor. The B-Box RCP supports…
-
RES – Resolver
The resolver interface block decodes the feedback from a resolver and provides the position of the rotor for drive applications. The B-Box RCP supports up…
End of content
End of content