This guide provides an overview of key points to consider when testing power converters in a laboratory environment, covering personnel safety, equipment protection, and the…
This technical note demonstrates the control of a Doubly-Fed Induction Generator (DFIG) in a wind turbine application. Firstly, the operating principles and control strategy for…
The DIN50A block is a simulation model included in the Imperix Power library. It implements the model of the imperix ±50 A DIN rail-mountable current sensor…
The DIN800V block is a simulation model included in the Imperix Power library. It implements the model of the imperix ±800 V DIN rail-mountable voltage sensor…
The MTB block is a simulation model included in the Imperix Power library. It models the imperix motor testbench in Simulink and PLECS simulation. For more…
This page explains how to get started with the motor drive bundle and the motor testbench. It provides a comprehensive overview of the hardware configuration…
The DQ-type PLL is a basic Phase-Locked Loop (PLL) used to extract the phase information of three-phase voltages. It operates by minimizing the voltage projected…
This page presents an implementation example of Selective Harmonic Elimination (SHE) using the PP-PWM modulator. This example addresses a high-power 3-level NPC inverter tied to…
The FPGA-based PP-PWM (programmed pulse pattern) peripheral provides a specialized PWM scheme for two and three-level inverters, which relies on pre-computed pulse patterns. This type…
This page gives an overview of possible variable speed drive (VSD) configurations and how to implement them using imperix solutions. Thanks to a modular approach,…
End of content
End of content
