The tunable parameter block creates a variable that can be altered in real-time using imperix Cockpit. It supports the int32, uint32, and float data types. Simultaneously, the tunable parameter…
The probe variable block creates a variable that can be watched and logged in real-time using using imperix Cockpit. It supports the int32, uint32, and…
The Core state block returns the state of the target: The block also provides a second signal called “reset” that can be wired to the…
The external reset block provides a signal that can be wired to the external reset input of PID controllers to keep the integrator at reset…
This block issues a request to enable or disable the PWM outputs, similar to the “Enable outputs” button of BB Control utility software. It issues…
The Sandbox Output towards FPGA (SBO) block writes the value of the SBO registers in the FPGA. It is used to transfer data from the…
The Sandbox Input from FPGA (SBI) block reads the value of the SBI registers in the FPGA. It is used to transfer data from user-made…
The CAN_out block implements an output mailbox that supports sending messages using the CAN bus protocol. To receive messages, the CAN in block should be…
The UDP output mailbox block allows sending up to 1024 bytes of data via Ethernet using the UDP/IP protocol (in SDK versions prior to 2025.2,…
The UDP input mailbox block allows receiving up to 1024 bytes of data via Ethernet using the UDP protocol (in SDK versions prior to 2025.2,…
End of content
End of content
