This page presents a practical example of Aurora communication with Typhoon HIL simulators, specifically the HIL101, HIL404, HIL506, and HIL606. It provides a ready-to-use user…
Conventional model-based control in power electronics relies heavily on deriving precise mathematical models of the physical system. In contrast, data-driven control shifts this paradigm by…
This technical note introduces the basic principles of HIL simulation and provides practical considerations for the implementation of a controller-HIL setup using the imperix B‑Board…
This article details the underlying clock architecture and timing configurations of imperix controllers, focusing on the four internal time bases (CLK0–CLK3) that govern ADC sampling,…
This note describes the control of an adapted Siemens SINAMICS S120 active line module using the imperix B-Board PRO embedded control platform. With its low…
This article describes how to use the XY plot module of imperix Cockpit to interact with the user code running on imperix controllers, namely the…
This page presents a practical example of Aurora communication with OPAL-RT simulators, specifically the OP4510 and OP4512. It provides a ready-to-use user application, along with…
While imperix controllers are typically programmed with applications built in Simulink or PLECS, imperix also provides direct access to FPGA resources through its FPGA development…
This page presents a practical example of Aurora communication with with Plexim simulators, namely the RT-Box 1, RT-Box 2 and RT-Box 3. It provides a…
The EnDat block instantiates an EnDat master to communicate with compatible digital encoders and similar digital sensors, typically in motor drive applications. This block is…
End of content
End of content
