Angle generator
SD036The angle generator block contains a counter that continuously outputs the current value of the angle, wrapped between the chosen lower and upper limits, with…
SD036-
-
PEB – Half-bridge module
SD300
The PEB block is a simulation model included in the Imperix Power library. It models the imperix half-bridge module PEB8038, PEB8024, and PEB4050 in Simulink…
-
Finite control set MPC for a voltage-controlled inverter
TN162
This article introduces an example of Finite Control Set Model Predictive Control (FCS-MPC) for an LCL-filtered voltage-controlled inverter. The proposed control implementation is derived from…
-
DQ-type PLL
SD035
The DQ-type PLL is a basic Phase-Locked Loop (PLL) used to extract the phase information of three-phase voltages. It operates by minimizing the voltage projected…
-
Selective Harmonic Elimination for medium voltage drives
This page presents an implementation example of Selective Harmonic Elimination (SHE) using the PP-PWM modulator. This example addresses a high-power 3-level NPC inverter tied to…
-
PP-PWM – Programmed Patterns PWM
The FPGA-based PP-PWM (programmed pulse pattern) peripheral provides a specialized PWM scheme for two and three-level inverters, which relies on pre-computed pulse patterns. This type…
-
Power electronic bundle – quick start guide
PN171
Thanks to its flexibility, the power electronic bundle allows for the implementation of numerous power converter topologies. As an example, this page explains how to…
-
Coordinated control of a back-to-back inverter
This technical note gives general insights on the implementation of coordinated control using imperix’s rapid control prototyping solutions. A grid-tied back-to-back three-phase inverter is given…
-
Buck-boost converter
This technical note describes the operating principles of a buck-boost converter. A possible open-loop control implementation of this converter, targeting the B-Box RCP or B-Board PRO with both C/C++ and automated code…
-
Step-up boost converter
This technical note describes the operating principles of a step-up boost converter. A possible open-loop control implementation of this converter, targeting the B-Box RCP or B-Board PRO with both C/C++ and automated…
End of content
End of content