This example generates three phase alternating currents from a voltage source inverter in an open loop manner. It can be used in a grid-forming application.
The note introduces an example of Direct Torque Control (DTC) for an electric drive using a permanent magnet synchronous motor (PMSM) and a programmable inverter.
The note introduces an electric car motor control strategy. The system is tested on a back-to-back motor testbench with car emulation.
The note introduces a wind turbine generator control technique with sensorless algorithm. The system is tested on a back-to-back motor testbench.
This application presents a multi-converter system with three DC/AC converters connected to a micro-grid. This could typically represent three photovoltaic inverters sharing a single PCC…
This technical note provides an example of how a fast hysteresis current controller can be implemented, leveraging the possibility of editing the FPGA firmware for…
The “abc to dq0” block computes the coordinates of a three-phase (abc) signal in a rotating reference frame (dq0). The angle of the rotating reference…
The “dq0 to abc” block computes a three-phase (abc) signal from a space vector in a rotating reference frame (dq0). The angle of the rotating…
The “adc to Alpha-Beta-Zero” block computes the coordinates of a three-phase (abc) signal in a stationary reference frame (αβ0). The transformation is performed using the…
The “Alpha-Beta-Zero to abc” block computes a three-phase (abc) signal from a space vector in a stationary reference frame (αβ0). The transformation is performed using…
End of content
End of content
