This technical note shows how an SPI communication link can be established between an FPGA and an external Analog-to-Digital Converter (ADC). The development setup will…
This technical note shows how the implementation of an FPGA-based hysteresis controller can be conducted, starting from the modeling stage, following with automated VHDL code…
This technical note provides an example of how a fast hysteresis current controller can be implemented, leveraging the possibility of editing the FPGA firmware for…
This technical note presents various techniques for the DC bus balancing of NPC converters. These techniques are notably used in TN135, which implements a grid-tied…
This technical note addresses the sensorless control of motor drives using a back-EMF sliding-mode observer. The technique allows speed and position estimation of a Permanent…
This note covers the I-f startup method for speed sensorless motor control and its implementation on a programmable power converter prototype.
This note covers the V/f control of an induction machine and its implementation on a programmable drive inverter.
This note introduces a conventional control for Modular Multilevel Converters (MMC). The converter is used in a DC/AC inverter configuration and is connected to the three phase grid.
The note introduces a wind turbine generator control technique with sensorless algorithm. The system is tested on a back-to-back motor testbench.
The note introduces an electric car motor control strategy. The system is tested on a back-to-back motor testbench with car emulation.
End of content
End of content
