PEN – NPC phase-leg
SD302The PEN block is a simulation model included in the Imperix Power library. It models the imperix NPC phase-leg PEN8018 in Simulink and PLECS simulation….
SD302-
-
PEH – Full-bridge module
The PEH block is a simulation model included in the Imperix Power library. It models the imperix full-bridge module PEH4010 and PEH2015 in Simulink and…
-
Double pulse test applied to an imperix power module
TN154
Double pulse testing is a widely utilized method to evaluate the switching behavior of power semiconductor devices, such as MOSFETs and IGBTs, as well as…
-
Static synchronous compensator (STATCOM)
AN013
Static synchronous compensators (STATCOMs) are power electronic converters aiming at enhancing the overall power quality and system stability in power grids, by dynamically controlling the…
-
TPI SB-PWM – Helper block
The TPI SB-PWM helper block is a wrapper that simplifies the use of the SB-PWM block with the all-in-one programmable inverter (TPI8032 22kW). The TPI…
-
Angle generator
The angle generator block contains a counter that continuously outputs the current value of the angle, wrapped between the chosen lower and upper limits, with…
-
PEB – Half-bridge module
The PEB block is a simulation model included in the Imperix Power library. It models the imperix half-bridge module PEB8038, PEB8024, and PEB4050 in Simulink…
-
Solid-state transformer (SST) for MV-LV smart grids
This page introduces the implementation of a solid-state transformer with cascaded H-bridge, dual active bridge, and grid-forming inverter.
-
Finite control set MPC for a voltage-controlled inverter
TN162
This article introduces an example of Finite Control Set Model Predictive Control (FCS-MPC) for an LCL-filtered voltage-controlled inverter. The proposed control implementation is derived from…
-
Neutral Point Clamped Inverter (NPC)
Closed-loop current control for a grid-tied Neutral Point Clamped (NPC) inverter. The considered setup is a three-phase three-wire NPC inverter supplied by a DC source and connected to the grid.
End of content
End of content