PEB – Half-bridge module
SD300The PEB block is a simulation model included in the Imperix Power library. It models the imperix half-bridge module PEB-800-40, PEB8038, PEB8024, and PEB4050 in…
SD300-
-
Solid-state transformer (SST) for MV-LV smart grids
AN015
This page introduces the implementation of a solid-state transformer with cascaded H-bridge, dual active bridge, and grid-forming inverter.
-
Finite control set MPC for a voltage-controlled inverter
TN162
This article introduces an example of Finite Control Set Model Predictive Control (FCS-MPC) for an LCL-filtered voltage-controlled inverter. The proposed control implementation is derived from…
-
Neutral Point Clamped Inverter (NPC)
Closed-loop current control for a grid-tied Neutral Point Clamped (NPC) inverter. The considered setup is a three-phase three-wire NPC inverter supplied by a DC source and connected to the grid.
-
Onboard battery charger for electric vehicles
AN010
What is an onboard battery charger? An onboard battery charger (OBC) is an automotive power electronic converter tailored to charge an EV directly from the…
-
MMC bundle – quick start guide
This article gives step-by-step instructions on how to operate the modular multilevel converter (MMC) bundle with a simple control algorithm.
-
LLC resonant converter for battery charging applications
Thanks to its flexible output voltage range, the LLC resonant converter is a popular choice of topology for battery charger applications, such as onboard chargers…
-
Getting started with the B-Box Micro
PN107
This article provides getting-started information for working with the B-Box Micro inverter controller , focusing on the programming workflow and highlighting the easy transition from…
-
Cascaded H-bridge converter control
This article focuses on the control of a star-connected cascaded H-bridge (CHB) using voltage balancing controllers superimposed on a state-of-the-art cascaded voltage regulator with an inner current control loop.
-
Getting started with an NPC converter
Simple first-step guide to building NPC converters, taking as an example a 3-phase 3-level NPC converter supplied by a DC voltage and connected to a resistive load.
End of content
End of content