This technical note presents various techniques for the DC bus balancing of NPC converters. These techniques are notably used in TN135, which implements a grid-tied…
This technical note addresses the sensorless control of motor drives using a back-EMF sliding-mode observer. The technique allows speed and position estimation of a Permanent…
This note covers the I-f startup method for speed sensorless motor control and its implementation on a programmable power converter prototype.
This note covers the V/f control of an induction machine and its implementation on a programmable drive inverter.
This note introduces a conventional control for Modular Multilevel Converters (MMC). The converter is used in a DC/AC inverter configuration and is connected to the three phase grid.
The note introduces a wind turbine generator control technique with sensorless algorithm. The system is tested on a back-to-back motor testbench.
The note introduces an electric car motor control strategy. The system is tested on a back-to-back motor testbench with car emulation.
This application note details a possible control implementation on the B-Box RCP for a fast electric vehicle charger with intermediate storage. In this example, the…
This example implements the control for a three-phase PV inverter. Such a system can be typically found in small industrial photovoltaic facilities, which are directly…
The note introduces an example of Direct Torque Control (DTC) for an electric drive using a permanent magnet synchronous motor (PMSM) and a programmable inverter.
End of content
End of content
