The EnDat block instantiates an EnDat master to communicate with compatible digital encoders and similar digital sensors, typically in motor drive applications. This block is…
The BiSS-C block instantiates a Bidirectional Synchronous Serial – Communication (BiSS-C) master to communicate with BiSS-C-compatible digital encoders and similar digital sensors, typically in motor…
The SSI block instantiates a Synchronous Serial Interface (SSI) master to communicate with SSI-compatible digital encoders and similar digital sensors, typically in motor drive applications….
This guide provides an overview of key points to consider when testing power converters in a laboratory environment, covering personnel safety, equipment protection, and the…
This technical note demonstrates the control of a Doubly-Fed Induction Generator (DFIG) in a wind turbine application. Firstly, the operating principles and control strategy for…
The CSR block is a simulation model included in the Imperix Power library. It implements the model of the imperix current sensor CSR-25-HBW and DIN50A in…
The VSR block is a simulation model included in the Imperix Power library. It implements the model of the imperix voltage sensor VSR-1000-ISO, VSR-500-HBW, and DIN800…
The MTB block is a simulation model included in the Imperix Power library. It models the imperix motor testbench in Simulink and PLECS simulation. For more…
This page explains how to get started with the motor drive bundle and the motor testbench. It provides a comprehensive overview of the hardware configuration…
The DQ-type PLL is a basic Phase-Locked Loop (PLL) used to extract the phase information of three-phase voltages. It operates by minimizing the voltage projected…
End of content
End of content
