Closed rack – Quick start guide
PN157This document introduces the two variants of the closed rack (types C and D). Intended for first-time users, the guide details the auxiliary power supply…
PN157-
-
How to build an interleaved boost converter
PN173
This page is a quick-start guide to build an interleaved boost converter using imperix equipment. It is specifically made to accompany users who want to…
-
PEB-800-40 – Quick start guide
This article provides essential information for developing power converters using the PEB-800-40 module. It is intended to guide first-time users through the safe and successful…
-
Safety recommendations for working in the lab
TN181
This guide provides an overview of key points to consider when testing power converters in a laboratory environment, covering personnel safety, equipment protection, and the…
-
Active damping of LCL filters
TN123
Switching ripple filters are commonly added to grid-connected voltage source converters (VSCs) to filter out undesirable switching harmonics from the VSC’s output voltage. LCL filters…
-
Islanding detection for grid-forming inverters
TN173
What is islanding detection? Islanding occurs when part of a power network, disconnected from the main grid, is solely powered by some Distributed Energy Resources…
-
Active power filters for harmonics mitigation
TN163
This technical note provides an overview of Active Power Filters (APFs) designed for harmonic mitigation and specifically targeting three-phase grid-connected inverters. The note begins by…
-
Single phase inverter operation in open-loop
This technical note introduces the working principles of a single phase inverter. It presents a simple technique to generate an alternating current in an open-loop…
-
Grid synchronization methods
This technical note presents a selection of the most prevalent grid synchronization methodologies employed in grid-tied power converters. These methods are crucial for enabling power…
-
CSR – Current sensor
SD308
The CSR block is a simulation model included in the Imperix Power library. It implements the model of the imperix current sensor CSR-25-HBW and DIN50A in…
End of content
End of content