Read from file
SD039The “Read from file” function allows applying dataset profiles from the controller’s non-volatile memory into user code during runtime. This mechanism is available in the…
SD039-
-
Write to file
The “Write to file” function allows writing variables from the user code to the controller’s non-volatile memory during runtime. Recorded data can subsequently be downloaded…
-
Multi-rate control
PN265
This note addresses the implementation of CPU-based multi-rate control on imperix controllers, supported by both the ACG SDK (for Simulink and PLECS environments) and the…
-
FLT – Fault inputs
SD008
At the hardware level, FLT inputs are special-purpose digital inputs that can be configured to generate a “hardware fault” in order to instantly disable all PWM outputs…
-
GPO – General purpose outputs
At the hardware level, GPO outputs are general-purpose digital outputs that can be configured for various purposes. This block and the associated C/C++ routines provide means to…
-
GPI – General purpose inputs
At the hardware level, GPI inputs are general-purpose digital inputs that can be configured for various purposes. This block and the associated C/C++ routines provide means to…
-
DAC – Analog outputs
The DAC block, or its equivalent C++ routines, is used to apply a given value to one of the Digital-to-Analog Converter (DAC) channels of the…
-
Multi-rate control on Simulink with ACG SDK
This document provides instructions for configuring CPU-based multi-rate control for imperix controllers using Simulink with the ACG SDK. It allows executing part of the control…
End of content
End of content