Closed-loop current control for a grid-tied Neutral Point Clamped (NPC) inverter. The considered setup is a three-phase three-wire NPC inverter supplied by a DC source and connected to the grid.
Simple first-step guide to building NPC converters, taking as an example a 3-phase 3-level NPC converter supplied by a DC voltage and connected to a resistive load.
The SS-PWM peripheral provides a specialized Pulse Width Modulation scheme (PWM) for multilevel converters, which directly integrates means for balancing series-connected submodules. Such an approach…
Imperix’s standard workflow programs the CPU of programmable controllers from Simulink, PLECS, or the Imperix IDE using the ACG SDK or CPP SDK. This proves…
This technical note presents various techniques for the DC bus balancing of NPC converters. These techniques are notably used in TN135, which implements a grid-tied…
This note provides instructions for integrating C code into a control algorithm developed using the ACG SDK via S-Functions, which is probably the best way…
End of content
End of content
