Applying pre-recorded profiles as setpoints
This note presents a possible approach to apply pre-recorded profiles as setpoints for a control algorithm developed on Simulink with ACG SDK. It assumes the…
This note presents a possible approach to apply pre-recorded profiles as setpoints for a control algorithm developed on Simulink with ACG SDK. It assumes the…
In a standard configuration, the control algorithm is executed just after each sampling event. The oversampling feature enables the possibility to set up multiple sampling…
The BB Control Timing info tab provides a graphical representation of the various computation and communication delays involved in the B-Board PRO and B-Box RCP…
This example generates three phase alternating currents from a voltage source inverter in an open loop manner. It can be used in a grid-forming application.
This article covers the control of a single phase solar PV inverter using Fictive Axis Emulation (FAE) and its implementation on a programmable power converter.
This note shows a possible control for a grid tied back to back converter. The proposed control implements active damping of the LCL filter.
This example implements the control for a three-phase PV inverter. Such a system can be typically found in small industrial photovoltaic facilities, which are directly…
This application note details a possible control implementation on the B-Box RCP for a fast electric vehicle charger with intermediate storage. In this example, the…
This application presents a multi-converter system with three DC/AC converters connected to a micro-grid. This could typically represent three photovoltaic inverters sharing a single PCC…
This notes covers the implementation of a high fidelity audio amplifier by means of a Modular Multilevel Converter (MMC).
End of content
End of content