This page presents a first HIL example to get started with a B-Box RCP and an OPAL-RT OP4510. Although validated with an OP4510, the provided…
This technical note presents a selection of the most prevalent grid synchronization methodologies employed in grid-tied power converters. These methods are crucial for enabling power…
This technical note demonstrates the control of a Doubly-Fed Induction Generator (DFIG) in a wind turbine application. Firstly, the operating principles and control strategy for…
The CSR block is a simulation model included in the Imperix Power library. It implements the model of the imperix current sensor CSR-25-HBW and DIN50A in…
The VSR block is a simulation model included in the Imperix Power library. It implements the model of the imperix voltage sensor VSR-1000-ISO, VSR-500-HBW, and DIN800…
The MTB block is a simulation model included in the Imperix Power library. It models the imperix motor testbench in Simulink and PLECS simulation. For more…
The PFB block is a simulation model included in the Imperix Power library. It models one symmetrical half of the imperix passive filters box in Simulink…
The GCP block is a simulation model included in the Imperix Power library. It models the imperix grid connection panel in Simulink and PLECS simulation. For…
The PEN block is a simulation model included in the Imperix Power library. It models the imperix NPC phase-leg PEN8018 in Simulink and PLECS simulation….
The PEH block is a simulation model included in the Imperix Power library. It models the imperix full-bridge module PEH4010 and PEH2015 in Simulink and…
End of content
End of content
