Double pulse testing is a widely utilized method to evaluate the switching behavior of power semiconductor devices, such as MOSFETs and IGBTs, as well as…
Static synchronous compensators (STATCOMs) are power electronic converters aiming at enhancing the overall power quality and system stability in power grids, by dynamically controlling the…
The angle generator block contains a counter that continuously outputs the current value of the angle, wrapped between the chosen lower and upper limits, with…
The PEB block is a simulation model included in the Imperix Power library. It models the imperix half-bridge module PEB-800-40, PEB8038, PEB8024, and PEB4050 in…
This page introduces the implementation of a solid-state transformer with cascaded H-bridge, dual active bridge, and grid-forming inverter.
This article introduces an example of Finite Control Set Model Predictive Control (FCS-MPC) for an LCL-filtered voltage-controlled inverter. The proposed control implementation is derived from…
Closed-loop current control for a grid-tied Neutral Point Clamped (NPC) inverter. The considered setup is a three-phase three-wire NPC inverter supplied by a DC source and connected to the grid.
This article introduces the concept of power factor correction (PFC) using a single-phase totem-pole PFC rectifier as an example. The theory presented is then validated…
What is an onboard battery charger? An onboard battery charger (OBC) is an automotive power electronic converter tailored to charge an EV directly from the…
Thanks to its flexible output voltage range, the LLC resonant converter is a popular choice of topology for battery charger applications, such as onboard chargers…
End of content
End of content
