Analog I/O configuration for imperix controllers
This page outlines the configuration methods for analog I/O channels on imperix controllers. While digital I/Os are configured exclusively via software and remain consistent across…
These notes are specifically related to imperix products. They address both control or power hardware, as well as software solutions. Their aim is to document what users should understand to properly use imperix products. Product notes, therefore, provide complementary information with respect notably to product datasheets.
This page outlines the configuration methods for analog I/O channels on imperix controllers. While digital I/Os are configured exclusively via software and remain consistent across…
This document introduces the two variants of the closed rack (types C and D). Intended for first-time users, the guide details the auxiliary power supply…
This document provides guidance for integrating imperix power modules into an open rack (type A). Intended for first-time users, the guide details essential mechanical considerations,…
This article details the timing configuration on imperix controllers, focusing on the four internal time bases (CLK0–CLK3) that govern ADC sampling, control-loop execution, and PWM…
This article describes how to use the Cockpit XY plot module to interact with the user code running on imperix controllers. This page provides a detailed explanation of…
This page presents a practical example of Aurora communication with OPAL-RT simulators, specifically the OP4510 and OP4512. It provides a ready-to-use user application, along with…
Imperix controllers typically have their CPU programmed from Simulink or PLECS. Additionally, the controllers also offer user-programmable FPGA resources in a dedicated area called Sandbox….
This page presents a practical example of Aurora communication with Plexim simulators, namely the RT-Box 1, RT-Box 2 and RT-Box 3. It provides a ready-to-use…
Introduction Power electronic converters pose a specific sampling challenge: the signals of interest (currents and voltages) are low-frequency components, but they are combined with a…
This page is a quick-start guide to build an interleaved boost converter using imperix equipment. It is specifically made to accompany users who want to…
End of content
End of content