XY Plot Module
This article describes how to use the XY plot module of imperix Cockpit to interact with the user code running on imperix controllers, namely the…
These notes are specifically related to imperix products. They address both control or power hardware, as well as software solutions. Their aim is to document what users should understand to properly use imperix products. Product notes, therefore, provide complementary information with respect notably to product datasheets.
This article describes how to use the XY plot module of imperix Cockpit to interact with the user code running on imperix controllers, namely the…
This page presents a practical example of Aurora communication with OPAL-RT simulators, specifically the OP4510 and OP4512. It provides a ready-to-use user application, along with…
While imperix controllers are typically programmed with applications built in Simulink or PLECS, imperix also provides direct access to FPGA resources through its FPGA development…
This page presents a practical example of Aurora communication with with Plexim simulators, namely the RT-Box 1, RT-Box 2 and RT-Box 3. It provides a…
Debugging an FPGA design can be difficult without clear visibility into the high-speed logic fabric, where signals change at nanosecond scales. Xilinx Integrated Logic Analyzer…
Introduction Power electronic converters pose a specific sampling challenge: the signals of interest (currents and voltages) are low-frequency components, but they are combined with a…
This page is a quick-start guide to build an interleaved boost converter using imperix equipment. It is specifically made to accompany users who want to…
This article provides essential information for developing power converters using the PEB-800-40 module. It is intended to guide first-time users through the safe and successful…
This article provides getting-started instructions for first-time users of the imperix ACG SDK. It focuses on the typical workflow associated with the simulation and automated…
All imperix products subject to user programming from the ACG SDK or the CPP SDK require a software license. This concerns the B-Box controllers family…
End of content
End of content