Electric Car Motor Control
AN011The note introduces an electric car motor control strategy. The system is tested on a back-to-back motor testbench with car emulation.
AN011
AN011
Motor speed control
TN114This technical note explains how to implement speed control for an electric motor. First, the note introduces the general operating principles of motor speed control,…
Cascaded voltage control
TN108This note introduces the general operating principles of cascaded control and then details a possible design methodology. Then, an example of cascaded voltage control for a boost converter is provided.
Direct Torque Control of a Permanent Magnet Synchronous Motor
AN004The note introduces an example of Direct Torque Control (DTC) for an electric drive using a permanent magnet synchronous motor (PMSM) and a programmable inverter.
Field oriented control (FOC) of permanent magnet synchronous machine (PMSM)
TN111The Field-Oriented Control (FOC) method is a motor control strategy that orients the stator current vector in a rotating reference frame of the machine.
Vector current control
TN106Vector current control is a widespread current control technique for three-phase AC currents, which uses a rotating reference frame, synchronized with the grid voltage (dq-frame)
Using the angle decoder modules
PN104This document provides instructions on how to interface an incremental encoder with a B-Box RCP or a B-Board PRO and how to read the motor…
Sensorless motor control using a back-EMF Sliding-Mode Observer
TN136This technical note addresses the sensorless control of motor drives using a back-EMF sliding-mode observer. The technique allows speed and position estimation of a Permanent…
I-f startup method for sensorless PMSM control
TN137This note covers the I-f startup method for speed sensorless motor control and its implementation on a programmable power converter prototype.
End of content
End of content