RES – Resolver
The resolver interface block decodes the feedback from a resolver and provides the position of the rotor for drive applications. The B-Box RCP supports up…
The Motor Interface is an extension of the B-Box RCP controller. It adds support for position, torque, and temperature measurements, as well as a brake control unit.
The resolver interface block decodes the feedback from a resolver and provides the position of the rotor for drive applications. The B-Box RCP supports up…
The hall sensor interface (HAL) block provides access to the commutation signals from Hall effect sensors of a brushless DC motor. The B-Box RCP supports…
The sin/cos encoder (S/C) block retrieves the Sine and Cosine signals of a sin/cos encoder connected to the Motor Interface. The B-Box RCP supports up…
The temperature sensor (TMP) block provides access to the temperature measurement from a PT100 or PT1000 sensor for drive applications. The B-Box RCP supports up…
The torque sensor (TRQ) block reads the voltage output of a torque sensor and converts it to torque. It targets drive applications. The B-Box RCP…
The brake (BRK) block provides access to the brake control unit of the Motor Interface for B-Box RCP. The Motor Interface for B-Box RCP features a brake…
This page gives an overview of possible variable speed drive (VSD) configurations and how to implement them using imperix solutions. Thanks to a modular approach,…
This page explains how to get started with the motor drive bundle and the motor testbench. It provides a comprehensive overview of the hardware configuration…
End of content
End of content