HAL – Hall sensor input
SD102The hall sensor interface (HAL) block provides access to the commutation signals from Hall effect sensors of a brushless DC motor. The B-Box RCP supports…
SD102
SD102S/C – Sin/cos encoder
SD103The sin/cos encoder (S/C) block retrieves the Sine and Cosine signals of a sin/cos encoder connected to the Motor Interface. The B-Box RCP supports up…
TMP – Temperature sensor
SD104The temperature sensor (TMP) block provides access to the temperature measurement from a PT100 or PT1000 sensor for drive applications. The B-Box RCP supports up…
TRQ – Torque sensor
SD105The torque sensor (TRQ) block reads the voltage output of a torque sensor and converts it to torque. It targets drive applications. The B-Box RCP…
BRK – Brake
SD106The brake (BRK) block provides access to the brake control unit of the Motor Interface for B-Box RCP. The Motor Interface for B-Box RCP features a brake…
How to build a variable speed drive
PN180This page gives an overview of possible variable speed drive (VSD) configurations and how to implement them using imperix solutions. Thanks to a modular approach,…
Motor Testbench quick start guide
PN181This page explains how to get started with the motor drive bundle and the motor testbench. It provides a comprehensive overview of the hardware configuration…
TPI ADC – Helper block
SD200The TPI ADC helper block is a wrapper that simplifies the use of the ADC block with the all-in-one programmable inverter (TPI8032 22kW). Since the…
TPI GPI – Helper block
SD201The TPI GPI helper block is a wrapper that simplifies the use of the GPI block with the all-in-one programmable inverter (TPI8032 22kW). Simulink GPI…
TPI GPO – Helper block
SD202The TPI GPO helper block is a wrapper that simplifies the use of the GPO block with the all-in-one programmable inverter (TPI8032 22kW). Simulink GPO…
End of content
End of content