TPI GPI – Helper block
SD201Table of Contents
The TPI GPI helper block is a wrapper that simplifies the use of the GPI block with the all-in-one programmable inverter (TPI8032 22kW).
The TPI GPI helper block is available starting from version 3.9 of the SDK. The TPI8032 is required to use this driver. Please refer to its datasheet for more information on the location, numbering, and voltage levels of the GPIs.
Simulink GPI helper block
Signal specification
- The output signal returns the value of one GPI pin.
- The
siminput signal is used in simulation and documented in Simulation essentials with Simulink (PN135).
Parameters
Device IDselects which TPI to address when used in a multi-device configuration.GPI bitselects one pin to read.Show simulation input portdefines if the simulation input is displayed or not.
PLECS GPI helper block
Signal specification
- The output signal returns the value of one GPI pin.
- The target input port (only visible at the atomic subsystem level) is used in simulation and documented in Simulation essentials with PLECS (PN137).
Parameters
Device IDelects which TPI to address when used in a multi-device configuration.GPI bitselects one pin to read.Show simulation input portdefines if the simulation input is displayed or not.
C++ functions
There are no C++ helper functions for the TPI. Please refer to the generic GPI functions.
