This note presents several modulation techniques to operate a Dual Active Bridge (DAB) converter. First, the topology and the theoretical aspects of the Dual Active…
Power electronic converters generate non-ideal current and voltage waveforms, which unavoidably include a broad spectrum of undesirable switching harmonics. In most applications, these harmonics must…
Fictive axis emulation is a vector control technique that is mostly used in single-phase inverter applications, where the second axis β of a rotating reference…
This page presents a dead time selection method that can be used with imperix power modules. Appropriate dead time selection is crucial to guarantee the…
This example generates three phase alternating currents from a voltage source inverter in an open loop manner. It can be used in a grid-forming application.
This example implements the control for a three-phase PV inverter. Such a system can be typically found in small industrial photovoltaic facilities, which are directly…
This application note details a possible control implementation on the B-Box RCP for a fast electric vehicle charger with intermediate storage. In this example, the…
This note presents the various messages displayed on the LCD screen of imperix closed converter racks. These racks contain several power modules, forming a reconfigurable…
High-level synthesis (HLS) tools greatly facilitate the implementation of complex power electronics controller algorithms in FPGA. Indeed HLS tools allow the user to work at…
Introduction This technical note presents the implementation of an interleaved buck converter (multiphase step-down converter) and details an appropriate sampling method of the different currents…
End of content
End of content
