Electric Car Motor Control
The note introduces an electric car motor control strategy. The system is tested on a back-to-back motor testbench with car emulation.
The B-Box RCP is a fully programmable controller, specifically tailored for the control of power electronics converters.
Thanks to its fast programming and its embedded protections, it is ideally suited to the experimental validation of converter control algorithms in laboratory environments.
The note introduces an electric car motor control strategy. The system is tested on a back-to-back motor testbench with car emulation.
The note introduces a wind turbine generator control technique with sensorless algorithm. The system is tested on a back-to-back motor testbench.
This application presents a multi-converter system with three DC/AC converters connected to a micro-grid. This could typically represent three photovoltaic inverters sharing a single PCC…
This note introduces a conventional control for Modular Multilevel Converters (MMC). The converter is used in a DC/AC inverter configuration and is connected to the three phase grid.
This notes covers the implementation of a high fidelity audio amplifier by means of a Modular Multilevel Converter (MMC).
This note covers the rotor field-oriented control of an induction machine and its implementation on a user-configurable voltage-source inverter.
This note covers the V/f control of an induction machine and its implementation on a programmable drive inverter.
This note covers the I-f startup method for speed sensorless motor control and its implementation on a programmable power converter prototype.
This technical note addresses the sensorless control of motor drives using a back-EMF sliding-mode observer. The technique allows speed and position estimation of a Permanent…
Closed-loop current control for a grid-tied Neutral Point Clamped (NPC) inverter. The considered setup is a three-phase three-wire NPC inverter supplied by a DC source and connected to the grid.
End of content
End of content