PFB – Passive filters box
The PFB block is a simulation model included in the Imperix Power library. It models one symmetrical half of the imperix passive filters box in Simulink…
The PFB block is a simulation model included in the Imperix Power library. It models one symmetrical half of the imperix passive filters box in Simulink…
Static synchronous compensators (STATCOMs) are power electronic converters aiming at enhancing the overall power quality and system stability in power grids, by dynamically controlling the…
This page introduces the implementation of a solid-state transformer with cascaded H-bridge, dual active bridge, and grid-forming inverter.
This article introduces an example of Finite Control Set Model Predictive Control (FCS-MPC) for an LCL-filtered voltage-controlled inverter. The proposed control implementation is derived from…
Simple first-step guide to building NPC converters, taking as an example a 3-phase 3-level NPC converter supplied by a DC voltage and connected to a resistive load.
Thanks to its flexibility, the power electronic bundle allows for the implementation of numerous power converter topologies. As an example, this page explains how to…
This note presents an FPGA control implementation of a grid-tied current-controlled inverter. It combines several control modules presented in different Technical Notes to form a…
This note shows a possible control for a grid tied back to back converter. The proposed control implements active damping of the LCL filter.
This article covers the control of a single phase solar PV inverter using Fictive Axis Emulation (FAE) and its implementation on a programmable power converter.
Power electronic converters generate non-ideal current and voltage waveforms, which unavoidably include a broad spectrum of undesirable switching harmonics. In most applications, these harmonics must…
End of content
End of content